Hello I have tried a serial installation of RedHat 6.2 / i86 and was successful after some workarounds. As the process was not straightforward and it took me to do some recherche over several sources and a applay a trial and error approach I would like to contribute this feedback in order that others will be faster to succeed. The situation was, that I bought a small Intel inside box (compaq deskpro en small) for the purpose of a small soho file- and mail-server for our Apple Powerbooks. Hp 2000 laptop recovery disk download. As I found it unnecessary to buy also an external monitor for this server in order to have the monitor switched on only for installation and for time to time maintenance I wanted to use a terminal emulation at the serial port of the server. These are the steps for a successful installation of RedHat 6.2 on a i86 box: - Serial cable and connection: To connect your PC, Mac or standalone Terminal you will need a null-Modem serial cable.
You can buy it or make it your self.
Configuration software The KS2000 configuration software permits project design, commissioning and parameterisation of the Beckhoff Fieldbus Box modules and of the Beckhoff Bus Terminals. The connection between the fieldbus components and the PC is established via the serial or USB connection cable provided, or via the network and TCP/IP. The KS2000 configuration software for different Windows operating systems has a friendly user interface, making work comfortable and convenient.
Parameterisation The KS2000 software provides an easy way to access the parameters in the fieldbus station. Specific high-level dialogues are available for all the Bus Couplers and all the intelligent Bus Terminals as well as the Fieldbus Box modules. They can be used to modify the settings easily. It is, alternatively, possible to parameterise the fieldbus components through direct access to all the internal registers. Start-up procedure The KS2000 offers access to the process images of the fieldbus components. In this way it is possible to monitor the input and output images of the Bus Terminals.
Ks 2000 Serial Cable
Access to individual signal channels is additionally supported via a scope functionality, which enables, for example, a wiring test to be carried out. In addition to the serial connection, the KS2000 services are also available via the fieldbus (e.g. PROFIBUS, Lightbus, Ethernet) via ADS. Via Ethernet, the KS2000 can thus also access BC9000 Ethernet controller Bus Terminals or CX Embedded PC Bus Terminals. The settings of a complete station can be saved and reinstated on the controller if required.
Hey all, I have a question here about a Dell PowerConnect 5224 switch I received not too long ago. I want to set it up and configure it in my office and to enable the management interface to it. However at the moment I have no way to connect to the serial port on the switch. My computers all are legacy free in that they don't have LPT or DB9 Serial ports, only LAN and USB. I did do some searching in my massive stockpile of parts and found I have a USB to RJ45 cable as well as a RJ45 (female) to DB9 (female) adapter which all fits perfectly to the DB9 port on the switch. However when I use hyperterminal in XP, connecting on Com1 and COM3, nothing happens. I'm thinking these cables/adapters might not be the right ones.
Is that correct or do I need something else cable wise? How do I accomplish this?? Connecting the Console Port The switch provides an RS-232 serial port that enables a connection to a computer or terminal for monitoring and configuring the switch. This port is a male DB-9 connector, implemented as a data terminal equipment (DTE) connection. To use the console port, you need the following equipment:.
A terminal or a computer with both a serial port and the ability to emulate a terminal. A null modem or crossover RS-232 cable with a female DB-9 connector for the console port on the switch - You need a 'null modem' cable - so its unlikely that throughing together some adapters and cables will work. The switch should of came with the cable.
If you have no computers with a serial port, then as suggesed buy a pic card or pcmcia card to provide you with one. But out of the box you should just be able to connect to the web interface - should you not? I see nothing in the docs about having to enable the web interface, etc. By default the management IP would be using dhcp, so it will IP from your dhcp server - and then just connect a machine to any one of its switch ports - they all default to vlan1 and you should be able to call up its web interface to manage it.
KS2000-Zx-USB USB cable for the connection between PC and fieldbus components The further development of PC technology and the establishment of new standards sometimes makes older technologies redundant. One example is the common serial RS232 interface, which is increasingly replaced by USB technology. In line with this development, the USB KS2000 cable is now available. The KS2000 cable establishes a connection between the fieldbus components and the PC. It can be used for parametering Bus Terminals or Bus Couplers, local diagnostics, forcing Bus Terminal data, monitoring Bus Terminal values, updating firmware and programming Beckhoff mini PLCs via TwinCAT.
The USB cable is available in two versions: KS2000-Z2-USB is used for the connection between a PC and a Bus Couplers from the BK, BC and LC series; KS2000-Z3-USB for the connection with Fieldbus Box modules. The USB cable features electrical isolation. Status LEDs indicate whether data are sent or received. On the connected PC the USB cable behaves like a COM port and can therefore be used for all Beckhoff tools using serial communication. Ordering information Description KS2000-Z2-USB connection cable for KS2000 or TwinCAT for serial conversion from USB for BK, BC, LC Couplers, length 3 m KS2000-Z3-USB connection cable for KS2000 or TwinCAT for serial conversion from USB for Fieldbus Box, lenght 3 m Accessories KS2000-Z2/Z3-USB cable, USB driver.
Comments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |